3M Screw On Mandrel
Screw on mandrel for 1" Scotch Brite wheels (3MW-7A1 and 3MW-2S1). Screws into a 3/16" hole. 1/4" chucking shank.
Regular price $8.25 $8.25
3M 1/4" Mandrel
Mandrel for 3/4" wide 2" wheel. 1/4" shank. Threads screw into 1/4" hole in wheel. Use with3MW-7A2S.
Regular price $10.45 $10.45
3M Mini Mandrel
Mandrel holds rectangles of Scotch-Brite hand pad (3MP-47). Chucked in a drill, works like a flap wheel to deburr tubing and irregular shaped edges. 3" long with 1/4" shank....
Regular price $12.30 $12.30
Die Grinder Kit
Kit Contains: Taylor Angle Die Grinder (not discontinued Sioux shown) Cutoff Disk (3) Cutoff Disk Mandrel 1" Light Deburring Wheels (2), 1" Cut and Polish Deburring Wheels (2), Mandrel for...
Regular price $134.99 $134.99
3M Reducer Bushing 1 - 5/8"
1" diameter bushing for reducing the hole of wheels from 1" to 5/8".
Regular price $3.00 $3.00
3 Inch Cutoff Disk
3 Inch cut-off disc with 1/4 inch center hole. Used for cutting thin walled tubing, sheet metal, fiberglass or for slotting applications. Use to cut off excess from canopy. Maximum...
Regular price $3.50 $3.50
3M Reducer Bushing 1 - 1/2"
1" diameter bushing for reducing the hole of wheels from 1" to 1/2". Included with 6" Light Deburr Wheel (3MW-77S6) and 6" Cut and Polish Wheel (3MW-7A6)
Cutoff Disk Mandrel
Mandrel for holding cut-off disc (CD-30) in die grinder. 2.5 x 1/4 shank. Slotted screw permits wheels to work close to adjacent surfaces.
Regular price $8.00 $8.00
