Tool Packages

TOOL PACKAGES

ANGLE DRILL	COMPLETE AIRFRAME	DIMPLE DIES & SETS	DIE GRINDER
COUNTERSINKING	FILING	RIVETING	EMPENNAGE

TOOL PACKAGES ARE FOR BUILDER'S CONVENIENCE AND MOST REFLECT A 5% LARGE PURCHASE DISCOUNT. (8% on COMP-KIT)

SUBSTITUTIONS, ADDITIONS, AND SUBTRACTIONS ARE WELCOME. 1-800-368-1822

TO MAKE CHANGES TO YOUR TOOL PACKAGE PLEASE CALL OR ENTER CHANGES IN THE SPECIAL INFO. BOX ON THE ORDERING PAGE.

***NEW*** CRAFTLINE TOOL CHEST

Holds our "Complete Tool Kit" including large items such as the rivet gun and pneumatic squeezer.
Small enough to take to the airport when the plane is ready.
Partitioned top till holds lift-out tray with divider included.
Key locks both the top lid and drawers.
Full extension roller bearings on bottom three drawers.
Full extension friction slides on top three drawers.
Steel construction with Aluminum anodized handles.
Dimensions: 26" W x 12" D x 15" H 48lbs.
6 Drawers: 3 - 6.7" x 10.5" x 1.6" 2 - 22.5" x 10.5" x 1.6" 1 - 22.5" x 10.5" x 2.5"
IF ORDERED WITH THE EMPKIT OR COMPKIT - 5% DISCOUNT OFF $141.00 = $134.00
Additional shipping applies $10 - $27 depending on location

CF-80	C-Frame Tool	$ 145.00
CL-332	50 Cleko-Loc 3/32" Fasteners	$ 19.00
CL-18	25 Cleko-Loc 1/8" Fasteners	$ 9.50
CLP-20	Cleko-Loc Pliers	$ 7.00
DBJ-40P	#40 Drill Bits - pkg 6	$ 7.00
DBJ-30P	#30 Drill Bits - pkg 6	$ 8.00
SPR-20	ProSnips - Left & Straight	$ 18.00
SPR-22	ProSnips - Right & Straight	$ 18.00
DBU-1	Unibit Step Drill 1/8-1/2by32nds	$ 18.00
MP-40	Permanent Markers - pkg 4	$ 5.00
FP-200	Fluting Pliers	$ 33.00
DB-04	Hex Deburring Tool	$ 17.00
BB-74	Mini Bucking Bar	$ 22.00
RG-2X	Rivet Gun (may sub any gun)	$ 168.00
RGS-25	EZ Change Retaining Spring	$ 0.00
ASRD-14	Swivel Air Regulator	$ 22.00
RSM-10	Mushroom Set	$ 14.00
RSC-43	1/8" Cupped Set	$ 9.00
RSB-35	Back Rivet Set	$ 20.00
RSO-48	Double Offset 1/8" Cup Set	$ 17.00
CT-196	Micro Stop Countersink Unit	$ 28.00
CC-40	Countersink Cutter - 3/32"	$ 8.50
CC-30	Countersink Cutter - 1/8"	$ 8.50
BBRP-48	Back Riveting Plate	$ 26.00
DIE426-3	3/32" Dimple Dies	$ 34.00
DIE4263CQ	Close Quarters Die Set	$ 17.00
DIE4264	1/8" Dimple Die	$ 34.00
HS-30	Offset Hand Seamer	$ 32.00

EMP-KIT	TOTAL KIT COST	$ 726.00

RG-2X	Taylor 2X	$168.00	CL-180	150 Cleko Fasteners - 1/8"	$57.00
RFS-50	Beehive Retaining Spring	$0.00	CL-316	10 Cleko Fasteners - 3/16"	$4.00
RGS-25	EZ Change Retaining Spring	$0.00	CLC-50	4 Cleko Clamps - 1/2"	$8.00
ASRD-14	Air Swivel Regulator	$23.00	CLC-100	4 Cleko Clamps - 1"	$10.00
RSM-10	Mushroom Set	$14.00	PRS-37	Swivel Head Pop Rivet Tool	$31.00
RSC-43	1/8" Cupped Set 3.5"	$9.00	HS-30	3" Offset Hand Seamer	$32.00
RSO-48	Double Offset Cupped Set	$17.00	DBC12-40	12" Cobalt Bit #40	$5.00
RLG-11	Rivet Length Gauge	$6.50	DBC12-30	12" Cobalt Bit #30	$5.20
RLG-4	4 Pc. Shop Head Riv Gauges	$15.00	STH/Y-3	Tatco Hand Squeezer/3"Yoke	$183.00
RSB-35	Back Rivet Set	$18.00	SSC-4	1/8" Universal Cupped Set	$7.00
BBRP-48	Back Rivet Plate	$25.00	SSF-1	Flat Set 1/2 x 1/8	$5.50
BB-74	Mini Bucking Bar 1 lb.	$22.00	SSF-2	Flat Set 3/8 x 1/8	$5.50
BB-30	Footed Bucking Bar 2.2 lb.	$26.00	DIE426-3	3/32" Dimple Die Set	$34.00
RT-811	Removable Rivet Tape	$3.50	DIE426-3CQ	3/32" Dimple Die Set	$17.00
RTD-34	Weighted Tape Dispenser	$6.00	DIE426-4	1/8" Dimple Die Set	$34.00
CT-196	Microstop Unit	$28.00	DIE509-6	#6 Screw Dimple Die Set	$34.00
CC-40	#40 Countersink - 3/32 Rivet	$8.50	DIE509-8	#8 Screw Dimple Die Set	$34.00
CC-30	#30 Countersink - 1/8" Rivet	$8.50	DIEB-28	Dimple Die Organizer	$23.00
CC-6	#6 Countersink - #6 Screw	$8.50	CF-80	C-Frame Riveting Tool	$145.00
CC-8	#8 Countersink - #8 Screw	$8.50	RS-24	24" Stainless Rule	$26.00
ADS12	Sioux 1/4" Air Drill	$225.00
SPR-20	ProSnips Left & Straight	$18.00
SPG-22	ProSnips Right & Straight	$18.00	DBU-3	Unibit 1/4"-3/4" by 1/16ths	$31.00
DBJ-40P	#40 Cobalt Bits - pkg 6	$7.00	MP-40	Permanent Markers - pkg 4	$5.00
DBJ-30P	#30 Cobalt Bits - pkg 6	$8.00	3MW-7A6	3M Cut & Polish Wheel	$49.00
DBJ-21	#21 Cobalt Bit	$1.85	EF-60	Edge Former	$39.00
DBJ-19	#19 Cobalt Bit	$1.95	DBS-33	Deburring Set - Aluminum	$15.00
DBJ-10	#10 Cobalt Bit	$2.45	DBB-70	Edge Deburring Bit	$5.50
DBS-SET4	Drill Stop - set of 4	$7.50	FP-200	Fluting Pliers	$31.00
DB-04	4" Hex Deburring Tool	$17.00	ALT-004	Air Tool Oil	$3.00
CLP-20	Cleko Pliers	$7.00	FV-8	8" Vixen File	$23.00
CL-332	300 Cleko Fasteners - 3/32"	$114.00	COMP-KIT	TOTAL KIT COST	$1605.00

				Add or Delete Items As You
	Sold Separately $1745.45			Would Like To

RG-2X	Taylor 3X or 2X Rivet Gun	$168.00
RFS-50	Beehive Retaining Spring	$0.00
RGS-25	E-Z Change Retaining Spring	$0.00
ASRD-14	Air Swivel Regulator	$22.00
RSM-10	Mushroom Set	$14.00
RSC-33	3/32" Cupped Set 3.5"	$9.00
RSC-43	1/8" Cupped Set 3.5"	$9.00
RSC-53	5/32" Cupped Set 3.5"	$9.00
RSC-63	3/16" Cupped Set 3.5"	$9.00
RSO-48	Double Offset Cupped Set	$17.00


BB-74	Mini Bucking Bar 1 lb.	$22.00
BB-83	Anvil Bucking Bar 1.9 lb.	$22.00
BB-30	Footed Bucking Bar 2.2 lb.	$26.00


RIV-KIT	TOTAL KIT COST	$315.00

* Items Sold Separately $313.00 = Savings of Over $35.00
* Also Available with an aluminum channel die block by request at extra cost.

DIES-6 SETS	6 Pairs of Dimple Dies	$204.00

DIE426-4S	Small Diameter Dies	$32.00
SSF-SET8	Set of 8 Flat Sets	$39.00
SSC-3	3/32 Universal Cup Set	$7.00
SSC-4	1/8 Universal Cup Set	$7.00
SSC-5	5/32 Universal Cup Set	$7.00
SSC-6	3/8 Universal Cup Set	$7.00
DIEB-10	Lucite Die Holder	$10.00
DIE-KIT	TOTAL KIT COST	$277.00

FV-10	10" Vixen File	$26.00
FK-5	5 Piece-8" File Assortment	$49.00
FH-22	Universal Handle	$5.00
FN-10	Needle File Set	$11.00
FCB-20	File Card/Brush	$8.00
FILE-KIT	TOTAL KIT COST	$94.00

You may substitute any of our die grinders and receive the same discount percentage.

ADG-50	Taylor Angle Die Grinder	$75.00
3MM-100	Screw on Mandrel	$5.50
3MW-2S1	2-1" Light Deburr Wheels	$9.00
3MW-7A1	2-1" Cut & Polish Wheels	$9.00
CDM-25	Cut-off Disk Mandrel	$7.00
CD-30	3 - Cut-off Disks	$9.00
ADG-KIT	TOTAL KIT COST	$109.00

CN-192	Notched Micro-Stop Cage	$37.00
CCSF-40	#40 Single Flute Cutter	$11.00
CCSF-30	#30 Single Flute Cutter	$11.00
CCSF-19	#8 Screw) S.F Cutter	$11.00
CCSF-28	#6 Screw) S.F. Cutter	$8.00
CN-KIT	TOTAL KIT COST	$77.00

ADA-30	Terry Angle Drill Adapter	$98.00
DBT-40	#40 x 1 1/4" Threaded Drill	$2.60
DBT-30	#30 x 1 1/4" Threaded Drill	$2.70
DBT-21	#21 x 1 1/4" Threaded Drill	$2.80
DBT-19	#19 x 1 1/4" Threaded Drill	$2.80
DBT-12	#12 x 1 1/4" Threaded Drill	$3.00
DBT-10	#10 x 1 1/4" Threaded Drill	$3.20
DBTS-40	#40 x 1/2" Threaded Drill	$2.90
DBTS-30	#30 x 1/2" Threaded Drill	$3.00
DBTL-40	#40 x 2 1/8" Threaded Drill	$3.30
DBTL-30	#30 x 2 1/8" Threaded Drill	$3.30
ADC-379	Mini 3-Jaw Chuck 1/16" - 1/4"	$41.00
ADA-KIT	TOTAL KIT COST	$160.00