SQUEEZERS

SN214 - PNEUMATIC SQUEEZER - $565.00           

• This pneumatic squeezers with 2.5" yoke is manufactured in the US using all new components.
• All moving parts are heat treated and tempered to ensure trouble free service.
• This type of squeezer requires a larger initial investment than the manual type; however, it will greatly speed up dimpling and riveting.
• The uniformity of dimples and rivets will be superior to those squeezed by hand.
• Available in larger size and price for squeezing spar rivets.

SCH-22 - "MAIN SQUEEZE" HANDLE - $235.00    

• New innovative design replaces traditional cam action.

• Length of ram is easily adjustable for different rivet lengths & dimple dies.

• Accepts pneumatic 214C style yoke which can be used on a pneumatic squeezer body if you decide to upgrade later.

• 6061 T-6 Aluminum with anodized finish.

• All moving parts are protected with oil impregnated bronze bushings.

• All other parts; pins, screws, ram, and rollers are stainless steel for long life.

• Ram contains rubber ring to avoid unwanted adjustment

• Quick change yoke pins allow rapid switching of yokes without tools.

---

214C YOKES - For Use with The Main Squeeze and Pneumatic Squeezers

 

SNSH100 - SET HOLDER FOR 1" YOKE BASE - $ 17.00           

SQP20 - QUICK CHANGE YOKE PINS - $ 4.50                           

• These pneumatic squeezer yokes, with a variety of nose designs and throat depths, are made from 4130 steel.
• They are heat treated prior to machining to eliminate warping.
• The varied yoke designs expand the usefulness of the pneumatic squeezer allowing hard to reach areas to be dimpled and riveted with ease.
• Yokes with 1" high bases require a short set holder.
• Yokes with 1.25" high bases require a long set holder.
• Quick Release Yoke Pins allow yokes to be changed quickly and easily.

KIT CONTAINS:

• SSW6 - SHIM WASHERS (PKG 6)
• SSFSET - SET OF 8 FLAT SETS
• SSC4 - 1/8" UNIVERSAL CUP SET
• SSC4S - 1/8" SHORT CUP SET

• ** The 1" thin nose is for tight areas - Upper nose serves as set.
• ** The 2" x 2" flange yoke has a wide opening for working over flanges.
• This is one of the best quality hand squeezers being manufactured today.
• Handles are made of thick walled stainless tubing.
• Yokes are investment cast from stainless.
• Ram length is adjustable for setting different length rivets.
• Accepts .187 "shank dies or sets.
• To minimize deflection when under pressure, we recommend buying the smallest reach yoke that will fit your application.

• SSF1 - 1/2" x 1/8" FLAT SET
• SSF2 - 3/8" x 1/8" FLAT SET
• SSF4 - 3/8" x 1/4" FLAT SET
• SSC4 - 1/8" UNIVERSAL CUP SET

  ---