LAYOUT TOOLS

CTL100 - CIRCLE TEMPLATE - LARGE - $8.00 - 1-1/4" to 3-1/2" Dia.            

CTS300 - CIRCLE TEMPLATE - SMALL - $8.00 - 1/31" to 1-1/4" Dia.             

• Pickett Templates provide an easy way to accurately position and draw circles.  
• Flexible smoke gray see through plastic.
• Built in risers to eliminate smudging or bleeding.
• Apertures incorporate pen allowances for accurate marking.
• Very useful for parts layout.

MP40 - MARKING PENS - 4 COLOR PACK - $5.00           

• Sharpie ULTRA-FINE Point Permanent Markers.
• Four colors - Black Blue Red Green
• Ideal for marking on aluminum.
• Utilize different colors for identifying parts, marking layouts, notations, etc.

Remember: Remove ink with lacquer thinner before painting.

CP40 - SMALL AUTOMATIC CENTER PUNCH - $31.00       

• Starrett brand Center Punch is 4 inches long.
• Adjusts for light to heavy marking.
• Moving parts US made from hardened alloy steel.
• Replaceable points.

SD640 - 6" STRAP DUPLICATOR #40 - $16.00           

• Bushing type strap duplicator used to locate holes on top skin when hole is already drilled in bottom skin but cannot be back drilled.
• Pry apart overlapping skins.
• Slip strap with pilot pin into hidden hole in bottom skin.
• Drill top skin through alignment bushing.

• The fan spacer is a neat tool used for laying out the equal spacing of rivet holes on aluminum.
• Adjust the outer holes to 24" separation and a standard 1-1/4" spacing is set.
• Infinite adjustment from 1/2" to 2" spacing is possible.
• Note: This tool is designed for marking only, not as a drilling guide.

IHT250 - INSTRUMENT MOUNT TEMPLATE - $13.00           

• Steel template for locating and drilling holes for instrument mounting screws.
• Centers itself in instrument hole cut-out.
• Template has hole patterns for both 3-1/8" and 2-1/4" standard instruments.

TPS7 - TRANSFER PUNCH SET - $24.00                                     

• These punches are for accurately transferring hole locations on part to another.
• The 7 sizes included are: 3/32" 1/8" 5/32" 3/16" 1/4" 5/16" 3/8"

DP8 - DRIVE PIN PUNCHES - $41.00                                            

• Useful for removing bolts or rivets.
• Set of 8, sized from 1/16" to 5/16" by 32nds of an inch.
• Starrett is a well known US brand with a reputation for very high quality and precision.

NPJ6 - PLATE NUT DRILL JIG #6 SCREW - $38.00             

• Designed for accurate drilling of rivet holes for K1000 & K1100 plate nuts.
• Flexible handle to provide hand clearance when jig is in use.
• First drill clearance hole for the screw, insert tool in hole and drill first rivet.
• Flip tool over, insert both pilots and drill the final hole.