FINISHING TOOLS
*CHECK OUT OUR FINISHING KIT ON THE "TOOL PACK" PAGE*
- New star silencer tip for low noise level - 79 DBA.
- Lever throttle adjusts air flow from trickle to full blast.
- Threaded for industrial type 1/4" quick coupler.
- Small 6" safety wire twisters are made from hardened alloy steel
with black oxide finish.
- Automatic return.
- Tapered nose style allows access to most applications.
- The longer version of the above.
- Diagonal nose.
- Automatic return.
- Allows for twisting in a clockwise or counterclockwise direction.
- Automatic return.
- Annealed stainless wire.
- Comes rolled in center feed cans.
AMP WIRE
TERMINALS
- Best we've ever seen.
- Easy to squeeze ratcheting crimper sets a crimp that really holds.
- Crimps 22-28, 16-18, 10-12 gauge terminals in three separate crimping
nests.
- Will not split, cut, crack the terminals.
- Makes perfect crimps every time.
- Crimps terminal and strain relief the correct amount.
- Great for aircraft electrical wiring.
- Self adjusting wire stripper cuts and strips 26-10 AWG wire.
- Breaks and pulls off casing without cutting or nicking the wire inside.
- Very nice tool for close quarter work such as behind instrument panel.
- Measures: DC Voltage, DC Current, AC Voltage, AC Current, and Resistance.
- Ruggedized multimeter will withstand 10 foot drop.
- Easy to see 1" high LCD display.
- Battery, Test leads, Protective rubber boot, and Instruction book included.
- 5 year limited warranty.
- Imperial Eastman Triple bender is US Made.
- Lever type multiple size bender.
- Calibrated markings for making accurate left-hand, right-hand, and
offset bends.
- Use for bending annealed copper, aluminum, steel, stainless steel,
and hard copper tubing of bending temper.
- Large handles 1/4", 5/16", and 3/8" tubing and makes
a 1" radius.
- Small handles 1/8", 3/16", and 1/4" tubing and makes
a 9/16" radius.
- Imperial Eastman tube cutter is ideal for cutting aluminum fuel and
pitot lines as they are installed in the fuselage.
- Designed for cutting copper, brass, aluminum, thin wall steel, stainless
steel, monel, and plastic in close quarters.
- This small 1.75" x 1.25" x .5" cutter handles 1/8"
thru 5/8" OD tubing.
- Best quality flaring tool on the market.
- Produces a perfect radius at the neck and a highly polished surface
on the face of the flair.
- Makes a 37 degree flair in the tubing
- 1/8", 3/16", 1/4", 5/16", 3/8", 7/16",
1/2", 5/8", 3/4" OD.
- Light weight polycarbonate safety glasses fit comfortably on your face
or can be worn over prescription glasses.
- The optically correct lens has an Ultradura anti-scratch coating.
- .
- This is the heavy duty of the DA sander below.
- Comes with 6" disk pad.
- Runs 10,000 rpm.
- Threaded to accept quick hose couplers.
- Made for a lifetime of daily use.
- DA (dual action) means that the pad spins as well as orbits.
- Comes with 6" disk pad.
- Runs 10,000 rpm.
- Threaded to accept quick hose couplers.
- Very useful when preparing fiberglass parts.
- DA (dual action) means that the pad spins as well as orbits.
- Very lightweight sander. (1.7lbs.)
- Palm value and thumb throttle for ergonomic operation.
- 12,000 RPM free speed
- .25 HP motor
- 78 dBA sound level
- 5" pad included
- Baldor industrial buffer has 1/3 HP motor.
- 3600 idle rpm.
- 1/2" dia. shaft with flanges and nuts included.
- Shown fitted with 3M wheels (page 10) not included.
- Runs smooth and quiet.
- Excellent quality buffer.
- Kalamazoo belt sander can be mounted vertically or horizontally on
your bench.
- 2" x 48" belt makes short work of sanding and shaping parts.
- Tilt table, contact wheel, removable platen, V-belt, and pulley included.
- 24" tall.
- DOES NOT come with motor, 1750 to 3400 rpm motor recommended.
- Excellent Quality.